The top 5 advantages of patio doors

Are you aiming to buy some outdoor patio doors however can’t decide? Patio doors are an excellent way of enhancing the look of your house, but what are our top 5 benefits of having patio doors installed in your house? If you are interested in receiving a quote then why not try to find your regional door fitter?


Setting up outdoor patio doors boosts the total appearance of your house. The natural light shines onto pieces of furniture creating a lively and peaceful atmosphere. The doors permit great views of the garden and can actually enhance the total house style.

Energy effective

Not only do patio doors provide severe beauty, they are likewise a very energy effective product. They allow for natural light to be contributed to your home causing less require for a/c or heating systems to be used.

Decrease energy expenses

With more natural light being added to your rooms, it triggers the requirement for cooling and heating to reduce. This can see a huge reduction in general energy costs and you can start to invest that money on more vital aspects of life.

Increased safety

Most Patio doors feature a Yale ModLok locking systems which allow for extreme security and reliability in your house. Patio doors are elegant and safe and secure, offering low profile thresholds to cater for the needs of today’s property owners.

Adds value to your house.

A well-structured and perfect design can make your home more attractive to potential purchasers which is why discovering the right local door fitter is necessary to the success of your patio doors.

Patio doors are a great method of bringing the outside in, they enable your living space to extend into the garden and you truly can make the look of your house something to be happy with.

Post Sponsored by Leeds Glazing – Your local Glazier in Leeds. Here for all your Glazing Repairs.

The difference that double and triple glazing can make to your home

Originally created to lower heat loss in homes and buildings, there are a wide variety of benefits associated with double or triple glazing, these include:

Energy Efficiency

If you want to keep your home cosy throughout the cold winter season and avoid paying higher than typical heating costs, double or triple glazing is a practical choice. The glass panes trap the air inside the window which serves as an insulator. It is estimated that heat loss is minimised by 54 to 64 percent with double or triple glazing. Glazing works the same way throughout summer season, it keeps your home cooler by restricting the heat transfer from the outside making your home cooler.

Sound Reduction

Single glazed windows don’t absorb noise; it travels straight through the glass and into your house. If you live near a main road, or in a busy location anticipate to hear every last knock and topple with one window pane. Double or triple glazing supplies noise insulation by minimising the energy levels produced by acoustic waves. This means you and your kids will sleep better, it will reduce your stress levels, and boost your capability to concentrate.

Minimized Condensation

Condensation can trigger problems such as mould, mildew; it decays window panes, damages lumber and most notably, causes illness such as bronchitis, allergic reactions and a host of other respiratory infections. Double and triple glazing reduces excess wetness on your window panes.

Post Sponsored by

5 Easy Tips to Extend the Life of Your Windows

Your windows are a huge investment. That’s why it’s essential to utilise these 5 simple tips to extend the life of your windows.

Cleaning Window Panes

You will want to clean your window panes and exterior frame and sash about two times a year. You can use mild soapy water and include a washing representative to prevent calcium discolourations. Make sure to clean all surfaces including crevices and corners. Make certain to eliminate any cobwebs due to the fact that these can block the water drainage and natural ventilation.

Maintenance of Exterior Timber

You’ll need to examine your timber windows on a regular basis to look for any fractures in the outside covering. It’s a good concept to repaint the windows once a year. You must clean the windows prior to painting, and be sure they are entirely dry. When repainting, you’ll wish to wait till the dew has actually dried. You’ll also want to leave time for the paint to dry prior to the night dew falls.

Care of External Aluminum

Aluminium needs little maintenance. You’ll need to wash them in the way explained above. Aluminium is very resilient, however in case you notice a little scratch, you can remove it with polishing compound.

Interior Timber

Interior wood just needs cleansing regularly. If it is exposed to grease and smoke, it will require more regular cleaning than those in other areas of the house. Tidy it with a fabric and mild detergent.

Weather Strips

Weather strips can be cleaned up when you clean the rest of your windows a couple of times a year. Other than that, you can utilise some silicone care item to ensure that it stays soft.

Post Sponsored by

Correct Maintenance of Exterior Timber Windows

Regular maintenance is important to extend the life of your exterior wood windows. You must clean your windows and frames a couple of times a year with soapy water. You ought to also open the windows to allow air to circulate, and to clean up all areas of your windows. Make certain to remove cobwebs and any other particles that may be obstructing your water drainage and ventilation vents.

Maintenance on timber windows is necessary to their longevity, however it does not need to be a trouble. You will require to examine them thoroughly when you tidy your windows. The southern and western sides and other locations that receive great deals of sunshine must be paid unique attention to, because the rays from the sun are tough on woodwork. If your home does not have eaves to protect the windows, they may need a bit more care.

If you see any scratches or cracks in your paint, it’s time to repair it before it harms your windows. Painting your panes will cover and seal any scratches before they have time to harm your windows. Reviewing your exterior panes once a year is an excellent way to make sure that they remain in good condition, and it keeps them looking fantastic as well.

It’s excellent to paint in the middle of the day. You will wish to wait till the morning dew has dried, and provide the paint time to dry prior to the evening dew falls. You can use any oil or water based paint, but the paint from the factory is water based gloss 20.

Cleaning and examining your windows a couple of times a year and a new coat of paint once a year will extend the looks and life of your windows.

Post Sponsored by

Care of Exterior Aluminium Windows

Exterior aluminium windows greatly reduce the amount of maintenance that your windows will need. They still require maintenance a couple of times a year. Here’s what you need to know to take care of your outside aluminium windows.

The exterior aluminium windows will require to be washed a few times a year. Start by cleaning up the tracks of your windows. To clean up the tracks of your windows, integrate one part baking soda, one part vinegar, and four parts water in a tidy spray bottle. Spray this in the tracks of your windows. You can then transfer to cleaning up the frame.

You can wash the aluminium with a soapy water and a soft cloth. Provide a great rinse, and after that use a dry fabric to dry them. For dirtier windows, you can blend a paste of lemon juice and baking soda. Let this sit for a number of minutes, and then rinse the windows with a moist rag. Dry them with a dry fabric after you wash them.

After you’ve removed all of the dirt from your windows, you will require to examine them for scratches or other damage. If there are little scratches on your aluminium, you can rub them out with a polishing substance designed for use on aluminium.

Aluminium is 3 times more powerful than vinyl, making it a fantastic choice for your windows. Aluminium is extremely long lasting, and it is resistant to scratches, dents and breaking. This enables the windows to last a very long time with extremely little maintenance.

Post Sponsored by Essex Glaziers 24/7 – Your Local Glazier in Essex.

Quick & Easy Ways To Go Green

We have actually assembled some easy actions you can make towards a greener future.

Make your home more efficient:

  • Use LED bulbs throughout your house. You will use less electrical energy and your bulbs will need to be replaced less regularly than regular lighting.
  • Set up photovoltaic panels and battery storage.
  • Upgrade older windows with energy effective glazing.
  • Disconnect your home appliances and gadgets when not in use to prevent unneeded energy loss.
  • Add insulation to your home. This will permit you to utilise your heating less and keep your home warmer, for longer.

Make a difference in the kitchen:

Meal Plan. 

  • Lower waste by thoroughly planning your meals for the week ahead. Strategy your meals around what products require to be taken in first.
  • Use the whole vegetable. The ends and Peels that you would normally bin, can be utilised to develop tasty stock that can be utilised for other meals.
  • Garden compost. Any leftover food you do have, compost it. This is an excellent way to minimise methane emissions from landfills and to reduce our carbon footprint.
  • Store food in glass containers rather than plastic.
  • Usage brown paper bags or beeswax wraps for food on the go.

Avoid single-use plastic:

  • Set up a filter at home to avoid or reduce purchasing bottled water.
  • Utilise your own bags when doing the grocery shopping.
  • Utilise a recyclable bamboo coffee cup when on the go, some coffee shops will even use a discount rate when you utilise your own cup.
  • Invest in reusable steel straws and bid farewell to plastic ones. In Ireland, plastic straws will be banned by 2021 together with plastic cutlery, plates, balloon sticks and cotton buds.

Post Sponsored by

5 Most Common Types of Traditional Glass

Standard glass is an essential part of the total aesthetic and character of historic structures, however is frequently maligned for its perceived imperfections. Thankfully, conventional glass is being protected and protected a growing number of; allowing it to be delighted in for years to come.

How do you understand if you have historical glass in your residential or commercial property? We take a look on top five different varieties of traditional glass and how you can recognise it in your own home.

1. Cylinder Glass

Cylinder glass was built by blowing a cylinder of molten glass, which was then cut at the ends and along the side prior to being flattened out in a heating system. It is also called “broad”, “sheet” or “muff” glass and was popular until the mid 1700s.

Cylinder glass can be identified by its somewhat rippled surface (which the ripples normally running in the very same instructions). This is generally accompanied by a pattern of long air bubbles that depend on straight, parallel lines.

2. Crown Glass

Crown glass is made by blowing and after that spinning molten glass into a large thin disc referred to as a table. This large thing disc would then be cut into smaller panes. Crown glass is often slightly curved with unique semi-circular lines called the ream. It is thinner, brighter and shinier than cylinder glass. It tends to have a noticeable pattern of concentric circles, and may have a small thick circle of glass or “bullseye” from the centre of the table.

3. Plate Glass

To make early plate glass, thick cylinder glass or cast glass was ground down to make it flat and then the surface polished until smooth. Plate glass was extremely pricey as a result of this labour-intensive process. It was utilised, from the late 1600s onwards, mainly for mirrors and to glaze high status structures.

4. Patent plate glass

James Chance created the procedure for making ‘patent plate’ glass in 1839. This process made it possible to grind and polish thinner sheets of glass than the traditional plate glass technique allowed. Manufacturers could then make more finished glass from the exact same amount of basic materials.

5. Drawn flat sheet

Glass production became more mechanised from the early 1900s. Various techniques were invented to allow a continuous sheet of glass to be extracted of a heater of molten glass. Each sheet was passed through a series of rollers and cooled, and then mechanically ground and polished.

Post Sponsored by

How Easy Are Roof Lanterns to Install

While some select skylights for their simpleness, roofing system lanterns are popular for offering a sophisticated alternative which lets optimum natural light into your spaces while serving as an appealing feature of your residential or commercial property. Generally installed in existing flat roofs such as extensions, office and conservatories, they lighten up spaces and offer a cosy, inviting feel with gorgeous aerial views of the sky above both in the day and in the evening. They can also increase the energy efficiency of your house, boasting functionality in addition to timeless architectural design.

Some homeowners worry that they’re complicated to set up, offering unwanted disturbance and tension. Such mistaken beliefs can stop home enhancements in their tracks.

Here’s our guide to how much trouble roof lantern setups actually are:-

Everything you need to understand about the advanced option to skylights. Need structure regulations? Are they complex to install? Make your house enhancement task as easy as possible using professional window fitters.

House owners often believe they’ll have to seek planning permission to set up a roofing system lantern, however this is typically not the case. Setting up skylights or roofing system lanterns at a home is deemed a typical project with advancement rules permitting such modifications within particular limits and conditions. The roof light needs to predict no greater than 150mm above the existing roofing system plane (and be no higher than the greatest part of the roofing system), any openings require to be 1.7 metres above the flooring, and any side facing windows will have to be obscure-glazed. Jobs which fall outside this scope or seriously change the structure of roofing may need structure guidelines to be acquired. Talk to your professional window installer who will comprehend what’s required and ensure your roof can support the extra weight.

The Installation Process

Expert installation is a should as while the frame is light, the glass is rather heavy. Your roofing lantern will be delivered to your house and assembled in the appropriate website, having made an opening for its installation. A skilled team will guarantee the roofing system lantern is set up efficiently with very little disruption while completely sealing it to prevent leakages and make sure it attains its weather resistance rating.

Selecting Your Options

Choosing the right alternative for your home couldn’t be much easier. An expert glazier will have the ability to guide you through the procedure step by step, carrying out a website survey, talking through any size, style and product options, along with helping you decide on the best position for the setup. Customise your roofing system lantern from a variety of shapes and designs to fit the period of your residential or commercial property, replicating the look you desire while managing the light entering your rooms. A choice of pyramid, curved and rectangle-shaped pitched structures, along with double colour finishes help to match the appearance of any residential or commercial property inside and out whether contemporary or conventional in style.

Post Sponsored by Your Local Glazier. Find Us by typing in ‘Glaziers Near Me‘ in your Google search.

How Does Double Glazing Work?

All modern houses now have double glazing, and older homes are slowly being brought up to date. The technology in double glazing uses better security and convenience when compared to single-pane glazing. However how does it work?

Double and triple glazing provide a multi-faceted defence versus cold weather, and understanding how it works can help you to select the best item. While all double glazing provides some energy efficiency, more pricey items can use a better defence.

The Air Gap

In double glazing, two panes of glass are installed in a sealed system. The gap between the panes is type in developing a thermal barrier. Air does not carry out heat effectively, so the trapped layer of air secures the house from heat loss. By putting the glass panes really close together, there’s less possibility that the air will move, which can even more improve the energy efficiency.

In lots of windows, the air between the panes is eliminated and replaced with a safe, inert gas. Gases like argon, xenon and krypton are even poorer conductors of heat than the air we breathe, which offers the window extra insulating properties.

This style also reduces sound transfer from the outside world, but the quality of the seal is crucial to make sure the gas and window panes work as they should.

The Glass

The panes of glass in a window likewise play a role in preventing heat transfer. A low-e finish can assist to stop heat being moved to the external window pane.

Coatings like this are generally entirely transparent, but you can also go with glass with a blue or bronze tint. These tinted windows are used to manage the amount of sunlight coming into the house, so they can keep locations like conservatories at a cooler temperature.

Other Factors

There are different other style features that change the method your windows work, and this is why the ideal provider is vital.

Spacer bars are the bars that separate the two panes of glass within a sealed unit. You can go with warm edge spacer bars, which stop heat from being transferred through the spacer bar and to the opposing pane of glass. Ask your provider whether warm edge spacers would be helpful.

While you can likewise include another pane to each window to produce triple glazed windows, you will not always double the energy efficiency performance, although there will be some improvement. A very high specification double glazed window may exceed a fundamental triple glazed window.

The window frames and fitting likewise affect the method a window works. Poor fitting of the frame can present draughts, sound problems and damp. In addition, the material used for the frame will have an impact.

Post Sponsored by Your Local Glazier. Find Us by typing in ‘Glaziers Near Me‘ in your Google search.

French Doors or Patio Doors?

If you’re thinking about expanding an existing door method, or changing your rotten patio doors, a new set of uPVC doors will make a staggering difference to the look of your house. In many cases, modern-day doors likewise improve energy performance and help to make your house cosier and warmer.

There’s still one decision to make: should you go for French doors, or patio area doors? If you’re unsure what the distinction is, continue reading for more information of both.

Door Design

French Doors open on both sides and supply a large access point to the home. They can open inwards or outwards, depending on your own choice and the method your garden or outdoor patio is set out.

With a patio door, one pane slides behind the other, which provides you a smaller sized opening. This does not necessarily imply they are less versatile.

The double door arrangement of French doors can offer generous access– convenient if you have a pushchair or a wheelchair to get in and out. In addition, moving furniture in and out of a house is much easier when you have a wider access point– moving doors don’t use this convenience.

The beauty of patio doors is that they are more or less wind resistant– they will not blow shut in a storm, which can be safer for little ones. You can unlock somewhat to ventilate a room without fretting about the doors walking around.

This also implies kids will not trap their fingers in the hinge.

French doors look fantastic in period houses where you want to keep a conventional and conservative appearance. You can opt for a variety of different surfaces, including wood grain results, to match the existing windows or produce a feature.

On the other hand, moving patio doors provide clean, streamlined lines with slim frames and little deals with. This can lower mess and make the doors look more modern.


All modern-day doors are manufactured to current Building Regulations and offer exceptional security and multi-point locks as requirement. There’s little distinction in between the doors in this regard.

You can go with double or triple glazing to improve defense, or choose laminated glass to minimize the danger that the doors will smash if hit with an item.

As constantly, a contemporary door will always be more safe and secure than an old door that is starting to reveal its age.

Post Sponsored by Harlow Glass 24/7 – Your Local Glazier.